Insulation Terminal Parameters

Number of conductors N: number of copper wire conductors in the flat wire;

Distance P: the distance between the center lines of two adjacent conductors;

Edge distance M: distance from the center line of the outermost conductor to the edge of the flat wire:

Full distance TP: the distance between the center lines of the outermost two conductors, TP=P * (N-1);

Total width W: the distance between the centers of two edges of the flat cable, W=P * (N 1);

Total length TL: distance between two ends of flat cable;

Penetration thickness TT: the thickness of two connection ends of the flat cable.